Hello Friends,
Back after a long break with another project. My next project is a "Simple Audio Rack" having 5 Nos shelf. This rack will be made from Teak Wood Blocks (pillars) and Plywood. Below are some 3D images of my design made with CAD program.
The 4 pillars are teak wood blocks which will be of 1 mtr (1000 mm) height. I will stain these pillars to make them look dark and cover them completely with clear coat of Malamine with spray gun.
The plywood used for shelf will be covered by laminate on top & sides, bottom side will be painted with black color. My budget will be around Rs. 5,500/- (excluding labor)
Cost Break Up :
Teak Wood : Rs 1,100/-
Laminate : Rs. 1,300/-
Plywood 18 mm : Rs. 1,400/- ( For 6ft x 4 ft Sheet)
And Another Rs 1,500 to 1,700 for Cutting, Color, Glue, Screws, Sand Papers etc.
Regards,
Sadik
Back after a long break with another project. My next project is a "Simple Audio Rack" having 5 Nos shelf. This rack will be made from Teak Wood Blocks (pillars) and Plywood. Below are some 3D images of my design made with CAD program.
The 4 pillars are teak wood blocks which will be of 1 mtr (1000 mm) height. I will stain these pillars to make them look dark and cover them completely with clear coat of Malamine with spray gun.
The plywood used for shelf will be covered by laminate on top & sides, bottom side will be painted with black color. My budget will be around Rs. 5,500/- (excluding labor)
Cost Break Up :
Teak Wood : Rs 1,100/-
Laminate : Rs. 1,300/-
Plywood 18 mm : Rs. 1,400/- ( For 6ft x 4 ft Sheet)
And Another Rs 1,500 to 1,700 for Cutting, Color, Glue, Screws, Sand Papers etc.
Regards,
Sadik